HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936) — Compatible Kits by RCScrewZ (Screws & Bearings)
Available Parts for this RC Model
- Stainless Steel Screw Kit
- Metal-Shielded Bearing Kit
- Rubber-Shielded Bearing Kit
RC Model Specs
- RC Model: HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936)
- Scale: 1:10
- Fuel Type: Nitro & Glow Fuel
- Vehicle Type: Touring Car
- Chassis: Nitro RS4 3 Evo Plus Touring Car
- Terrain: On-road/Street Use - RC Vehicle
- Production Era: Contemporary Era (2010-Present)
- OEM / Model Codes: 105936
RC Model Specific &
Compatible Kit Details
Stainless Steel Screw Kit
A2-70/A4-80 — Hex screws: Button Head, Socket Cap, Flat/Countersunk, Set Screws
- Material: A2-70/A4-80 Stainless Steel
- Screw Grade: A2-70/A4-80
- Coverage: Model-specific fasteners; replaces coarse screws
- Kit Contents:
- Socket Screws (with extras)
- Button Screws (with extras)
- Flat Head Screws (with extras)
- Set Screws (with extras)
- Nuts (with extras)
- Washers (with extras)
- Bondhus Short Arm Hex Wrenches (all sizes for your kit)
- Plastic Pit Case (durable, reusable, and great for storage)
- Pieces in Kit: 175+ Pieces
- Head Types: Hex screws: Button Head, Socket Cap, Flat/Countersunk, Set Screws
- Corrosion Protection: Rust-resistant stainless steel
- Maintenance: Re-check after first runs; retorque lightly
- Use case: Full RC Rebuild / Upgrade
- Install tips: Seat fully; avoid cross-thread
- Install tips: Blue threadlocker on metal-to-metal
- Ships from the USA
- Fast shipping with tracking
- Easy 30-day returns
- Earn rewards on every order
- Bundle and save with a Bearing Kit
- Type: Metal-Shielded (On-Road)
- Material: Carbon Chrome Bearings
- Included Bearings:
- 5x11x4mm bearings
- 6x10x3mm bearings
- 8x16x5mm bearings
- 10x15x4mm bearings
- RC Bearing Sizes: All Bearings Are Included + (1) Extra of Every Size for Spares
- Sealed Bearings: No
- Protection: Low-drag, not sealed
- Maintenance: Low-drag shields; keep dry; add light oil after cleaning.
- Use case: Race prep
- Bundle: Pair with Stainless Screw Kit for complete refresh.
- Install tips: Seat fully; Do not over-tighten
All-Inclusive kits feature Standard, Flanged, One-Way, and Thrust bearings (as applicable).
View Cart & Checkout- Ships from the USA
- Fast shipping with tracking
- Easy 30-day returns
- Earn rewards on every order
- Bundle and save with a Stainless Screw Kit
Rubber-Shielded Bearing Kit
- Type: Rubber-Sealed (Off-Road)
- Material: Dust-Resistant Carbon Chrome
- Included Bearings:
- 5x11x4mm bearings
- 6x10x3mm bearings
- 8x16x5mm bearings
- 10x15x4mm bearings
- RC Bearing Sizes: All Bearings Are Included + (1) Extra of Every Size for Spares
- Sealed Bearings: Yes
- Protection: Sealed against dirt & splash
- Maintenance: Sealed; after water/mud: clean, dry, re-lube.
- Use case: Drivetrain refresh
- Bundle: Pair with Stainless Screw Kit for complete refresh.
- Install tips: Seat fully; Do not over-tighten
All-Inclusive kits feature Standard, Flanged, One-Way, and Thrust bearings (as applicable).
View Cart & Checkout- Ships from the USA
- Fast shipping with tracking
- Easy 30-day returns
- Earn rewards on every order
- Bundle and save with a Stainless Screw Kit
Compatible Products — Add to Cart Below
FAQs for HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936) — Compatible Kits by RCScrewZ (Screws & Bearings)
How do I know these kits fit my HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936)?
Each kit on this page is made specifically for the HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936). We cross-check scale, chassis layout and hardware locations against the factory manual so you get the right stainless screws and bearings for this exact RC model—no measuring or guessing.
What's included in the stainless screw kit for HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936)?
Every RCScrewZ stainless steel screw kit for HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936) includes a model-specific mix of socket head, button head, flat head and set screws, plus matching nuts and washers—with extras of the most commonly used sizes. Each kit also comes with Bondhus short arm hex wrenches in the sizes used on your kit and a durable plastic pit case you can reuse for storage and organizing hardware. Exact counts and sizes vary by model. The kit does not include electronics, shocks, motors or engines, or plastic parts.
Which bearings are best for on-road use with HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936)?
If you run your HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936) mostly on clean pavement or prepared on-road tracks, metal-shielded bearings are usually the best choice. They roll with lower drag for more speed and longer run times. Rubber-Shielded sealed bearings add extra protection against dust and splash but have slightly more drag, so they are better if you see mixed or light off-road use instead of pure on-road racing.
How does RC Pro Club save me money on HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936) kits?
RC Pro Club is our rewards program for RC builders. Every order for your HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936) earns points you can redeem for discounts on future screw kits and bearing kits. When you grab multiple kits for the same model—like a stainless screw kit plus metal-shielded bearings—you earn more points in a single order and unlock bigger savings over time.
What's included in the RCScrewZ bearing kits for HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936)?
RCScrewZ bearing kits for HPI Racing Nitro RS4 3 RTR EVO+ 1/10 4WD Touring (#105936) are designed as a complete upgrade package. You get every bearing needed for the chassis plus one extra of each size for quick spares. Kits can include standard, flanged, one-way and thrust bearings where your model uses them, so you are not hunting for odd sizes or partial sets. Each kit comes packed in a reusable storage case that keeps your bearings sorted in the pit box and ready for the next rebuild.