Compatible RC Parts for: Traxxas 4-Tec 2.0 Ford GT 1/10 Electric AWD Touring (83056-4)

Fits the Traxxas 4-Tec 2.0 Ford GT 1/10 Electric AWD Touring (83056-4).

Vehicle image not currently available.

Compatibility is verified using the exact model information shown here.

Verified Model Information

Brand
Traxxas
Exact model
Traxxas 4-Tec 2.0 Ford GT 1/10 Electric AWD Touring (83056-4)
OEM model
83056-4
Scale
1:10
Power/fuel type
Electric
Vehicle type
1/10 Electric AWD On-Road Touring Car
Chassis/platform
Traxxas 4-Tec 2.0 Ford GT (83056-4)
Terrain
On-Road: Asphalt, Parking Lot & Smooth Pavement
Production era
Contemporary Era (2010-2019)

Pick Your Compatible Kit

Choose from the verified kit options available for this exact model:

Traxxas 4-Tec 2.0 Ford GT 1/10 Electric AWD Touring (83056-4)OEM model: 83056-4

STAINLESS RCScrewZ Stainless Steel Screw Kit tra080 for Traxxas 4-Tec 2.0 Ford GT Supercar 1/10 Electric AWD On-Road Touring Car (83056-4) | SET

Stainless Screw Kit

RCScrewZ Stainless Screw Kit

SKU: tra080

Corrosion-resistant model-specific replacement hardware.

Choose this kit when you want stainless replacement screws for this exact model.

Pieces in kit: 150+ Pieces

Verified fit for:

Traxxas 4-Tec 2.0 Ford GT 1/10 Electric AWD Touring (83056-4)

OEM model: 83056-4

$34.95$33.97

Available

View Kit Details
RUBBER RCScrewZ Rubber Shielded Bearing Kit tra080r for Traxxas 4-Tec 2.0 Ford GT Supercar 1/10 Electric AWD On-Road Touring Car (83056-4) | SET

Rubber-Sealed Bearing Kit

RCScrewZ Rubber-Sealed Bearing Kit

SKU: tra080r

Sealed protection against dirt, dust, and debris.

Choose this kit for rougher running conditions where sealed bearings are the priority.

Verified fit for:

Traxxas 4-Tec 2.0 Ford GT 1/10 Electric AWD Touring (83056-4)

OEM model: 83056-4

$59.95$53.67

Available

View Kit Details
METAL RCScrewZ Metal Shielded Bearing Kit tra080b for Traxxas 4-Tec 2.0 Ford GT Supercar 1/10 Electric AWD On-Road Touring Car (83056-4) | SET

Metal-Shielded Bearing Kit

RCScrewZ Metal-Shielded Bearing Kit

SKU: tra080b

Preferred for cleaner conditions and lower-drag priorities.

Choose this kit for cleaner running conditions and lower-drag priorities.

Verified fit for:

Traxxas 4-Tec 2.0 Ford GT 1/10 Electric AWD Touring (83056-4)

OEM model: 83056-4

$59.95$53.67

Available

View Kit Details

BEARING KIT GUIDE

Which bearing kit should I choose?

Compare the two verified bearing-kit options for this exact RC model.

Rubber-sealed bearing shown beside a metal-shielded bearing for visual comparison.
Representative illustration. Styles, sizes and quantities vary by kit.

Confirm the OEM/model number shown above before choosing a kit.

All Compatible Products

The listings below show the same verified kit roles with current pricing and links to full product details.

MODEL-SPECIFIC FAQ

Frequently Asked Questions

Questions and answers for Traxxas 4-Tec 2.0 Ford GT 1/10 Electric AWD Touring (83056-4) — Find Compatible Stainless Screw & Bearing Kits.

How do I know these kits fit my Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4)?
Each kit on this page is made specifically for the Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4). We cross-check scale, chassis layout and hardware locations against the factory manual so you get the right stainless screws and bearings for this exact RC model—no measuring or guessing.
What's included in the stainless screw kit for Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4)?
Every RCScrewZ stainless steel screw kit for Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4) includes a model-specific mix of socket head, button head, flat head and set screws, plus matching nuts and washers—with extras of the most commonly used sizes. Each kit also comes with Bondhus short arm hex wrenches in the sizes used on your kit and a durable plastic pit case you can reuse for storage and organizing hardware. Exact counts and sizes vary by model. The kit does not include electronics, shocks, motors or engines, or plastic parts.
Which bearings are best for on-road use with Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4)?
If you run your Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4) mostly on clean pavement or prepared on-road tracks, metal-shielded bearings are usually the best choice. They roll with lower drag for more speed and longer run times. Rubber-Shielded sealed bearings add extra protection against dust and splash but have slightly more drag, so they are better if you see mixed or light off-road use instead of pure on-road racing.
How does RC Pro Club save me money on Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4) kits?
RC Pro Club is our rewards program for RC builders. Every order for your Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4) earns points you can redeem for discounts on future screw kits and bearing kits. When you grab multiple kits for the same model—like a stainless screw kit plus metal-shielded bearings—you earn more points in a single order and unlock bigger savings over time.
What's included in the RCScrewZ bearing kits for Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4)?
RCScrewZ bearing kits for Traxxas 4-Tec 2.0 AWD 1/10 Elec Ford GT Supercar (83056-4) are designed as a complete upgrade package. You get every bearing needed for the chassis plus one extra of each size for quick spares. Kits can include standard, flanged, one-way and thrust bearings where your model uses them, so you are not hunting for odd sizes or partial sets. Each kit comes packed in a reusable storage case that keeps your bearings sorted in the pit box and ready for the next rebuild.

Need a different RC model?

Find Compatible RC Parts for Your Exact Model

Search by RC brand, model name, series/chassis, or OEM/model number. Exact Model Collections appear first so you can verify fit before choosing a Stainless Screw Kit, Rubber-Sealed Bearing Kit, or Metal-Shielded Bearing Kit.