Losi 1/12 NASCAR AWD Bearing Guide: Sizes and Kit Contents
Bearing sizes are written inner diameter × outer diameter × width. For example, 7 × 11 × 3 mm means a 7 mm center opening, an 11 mm outside diameter and a 3 mm width. Matching dimensions alone does not confirm compatibility with your model.
Hero: generic bearing illustrations; not an exact product or kit photograph.
Check the model before the kit
Identify your exact vehicle and the components installed in it. If hubs, axles or drivetrain parts have changed, check the requirements of those components. Use the correct model manual before choosing replacement bearings.
How to Read Bearing Sizes: ID × OD × Width

- Inner diameter (ID)
- The distance across the center opening of the bearing.
- Outer diameter (OD)
- The distance across the outside edges of the bearing.
- Width
- The distance between the bearing’s two flat faces, measured along its axis.
All dimensions below are in millimeters. The diagrams are generic and do not depict an exact kit.
Confirmed LOS152 pack contents
| Bearing size ID × OD × width |
Quantity in pack |
|---|---|
| 7 × 11 × 3 mm | 13 |
| 8 × 12 × 3.5 mm | 6 |
| Total | 19 |
One spare of each size is already included in the total. Pack quantity is not an installed-location map. Do not use this table to assign bearings to vehicle positions.
Watch: Three checks before ordering bearings
This 50-second guide explains model checks, bearing dimensions and the confirmed LOS152 pack contents.
Generic illustrations, not an exact kit photograph. Generic diagrams, not to scale. AI-generated narration.
Read the video transcript
Working on a Losi one-twelfth NASCAR AWD? Before ordering bearings, check your exact model and any parts that have been changed.
Read every bearing size as inner diameter, outer diameter, then width—all in millimeters.
The supplier-confirmed LOS152 pack includes thirteen bearings measuring seven by eleven by three millimeters, and six measuring eight by twelve by three point five millimeters.
That’s nineteen bearings total, with one spare of each size already included.
Kit quantity does not tell you where every bearing belongs. Check the correct model manual and confirm compatibility before ordering.
Save this check for your next repair.
J-M SUPPLIES RC Parts Store.
Metal shields and rubber seals: check the design
Metal shields usually do not contact the inner ring. Rubber seals can be contact or non-contact designs. The shield or seal material alone does not tell you the complete bearing specification. Check the particular bearing design and its intended application before choosing.
Do not assume a sealed bearing is waterproof. Follow the vehicle and bearing maker’s care instructions, including any extra maintenance needed after wet use.
Simple bearing care
Inspect bearings during wheel or drivetrain maintenance. Gritty movement, binding, excessive play or visible corrosion can mean a bearing needs attention. Check the surrounding parts too; resistance alone does not identify its cause.
Before disassembly, take a photo and keep small parts organized. Follow the correct model manual. Keep the two sizes separate, check all three dimensions, and avoid forcing a bearing into place. Remove dirt after use and follow the vehicle and bearing maker’s instructions for drying, cleaning and lubrication.
Common questions
Are there 19 bearings installed in the vehicle?
The confirmed number is the quantity supplied in the pack. It already includes one spare of each size. This guide does not establish an installed-bearing count or placement map.
Does matching the size prove a bearing fits?
No. Confirm the exact model, installed components and required bearing specification. Modified hubs or drivetrain parts can change what is needed.
Does rubber shielding mean waterproof?
No. Check the specific bearing design and follow its care instructions. This guide does not claim that either LOS152 bearing option is waterproof.
Before you order
- Keep all three dimensions and their units.
- Confirm the exact vehicle and installed components.
- Check the required bearing specification and the correct manual.
- Keep pack quantities separate from installed positions.
J-M SUPPLIES RC Parts Store

Leave a comment