Shield type
Rubber-Sealed (Off-Road)
SAVE
$6.28
$6.28
Why Choose This Kit
Key features and intended use for this kit.
Protection focus
Sealed against dirt & splash
Best suited for
Off-road / dirty conditions
Rubber-Shielded Bearings
RCScrewZ Rubber Shielded Bearing Kit kyo114r for Kyosho Inferno GT2 Chassis Kit / GT2 Race Spec 2020 Mercedes-AMG GT3 1/8 Nitro 4WD (#31830, #33027) | SET
Rubber-shielded bearings for land-based RC use where added protection from dust, dirt, sand, and mud is preferred.
Fits: Kyosho Inferno GT2 1/8 Nitro 4WD (31830, 33027)
OEM / model: 31830, 33027
US
- Regular price
- $53.67
- Sale price
- $53.67
- Regular price
-
$59.95
In stock
Confirm this kit fits your RCMatch the RC model and OEM/model number shown above to your vehicle.
Confirm This Fits Your RC
Match the RC model and OEM/model number below before ordering.
- RC model
- Kyosho Inferno GT2 1/8 Nitro 4WD (31830, 33027)
- OEM / model number
- 31830, 33027
- Kit type
- Rubber-Shielded Bearing Kit — Sealed for Off-Road Protection
- Scale
- 1:8
- Power
- Nitro & Glow Fuel
More compatibility details
- RC brand
- Kyosho
- Vehicle class
- Land
- Kit SKU
- kyo114r
- Model series
- Inferno, Inferno GT, Inferno GT2, GT2 Race Spec
Product information
Everything You Need Before Ordering
Review what is included, installation notes, shipping details, and complete kit information.
Kit Contents & Installation
What’s Included Model-specific bearing set with one spare of each included size.
- All bearing sizes listed below for this model-specific kit
- One spare of each included size
- Bearing styles vary by RC model and may include standard, flanged, one-way, or thrust bearings
Included bearing sizes for this kit:
- 5x8x2.5mm bearings
- 5x10x4mm bearings
- 6x10x3mm bearings
- 6x12x4mm bearings
- 8x16x5mm bearings
Installation & Model NotesInstallation, cleaning, inspection, and model-specific guidance.
Seat bearings fully and squarely. Do not force them into the housing or overtighten the hardware that retains them.
After dusty, muddy, or wet runs, clean the bearing exterior and dry it thoroughly.
Inspect the bearings for roughness, binding, noise, or excessive play before reuse; service or replace them as needed.
Details & Support
Kit Details Rubber-sealed protection for off-road, dusty, dirty, and muddy running conditions.
- Seal Type
- Rubber-Sealed Bearings
- Protection Priority
- Improved protection against dirt and splash; not waterproof
- Best For
- Off-road use, dust, dirt, sand, mud, and lower-maintenance protection
- Performance Tradeoff
- Protection is prioritized over the lowest possible drag
- Not Ideal For
- Clean, dry on-road or prepared-surface use when lower drag is the priority
- Prefer Metal-Shielded?
- Choose Metal-Shielded bearings for cleaner on-road or prepared surfaces when lower drag is the priority.
Shipping & Returns Handling time, current delivery estimate, and return policy.
Free shipping on all U.S. orders (USPS Priority Mail).
Ships within 1–2 business days (Mon–Fri); some Saturday shipments by 12:00 PM ET.
Most orders ship from Canton, MI 48187. APO/FPO/DPO & PO Boxes welcome.
Priority Mail typically delivers in 2–3 business days (estimates; not guaranteed).
Easy 30-day returns with prepaid USPS label; refunds issued within 3 business days after the return is received.
Over 99% positive over ~14,000 orders on eBay (last 12 months) — as of October 2025. View on eBay
Full Product Description Read the complete product specifications and details.
Exact RC Model Fitment
Confirm the exact RC model and RC vehicle OEM/model number below before ordering.
- Compatible RC Model
- Kyosho Inferno GT2 1/8 Nitro 4WD (31830, 33027)
- Compatible RC Brand
- Kyosho
- RC Vehicle OEM / Model Number(s)
- 31830, 33027
- RCScrewZ Kit Part Number
- kyo114r
Vehicle Compatibility Details
Review these vehicle details to help confirm compatibility with your RC model.
- RC Vehicle OEM / Model Number(s)
- 31830, 33027
- RC Chassis Compatibility
- Kyosho Inferno GT2 Platform (31830, 33027)
- Compatible Vehicle Type
- 1/8 Nitro 4WD GT Touring Car
- Terrain Compatibility
- Compatible Scale
- 1:8
- Compatible Fuel Type
- Nitro & Glow Fuel
What Is Included
Included bearing sizes for this Rubber-Sealed Bearing Kit:
- 5x8x2.5mm bearings
- 5x10x4mm bearings
- 6x10x3mm bearings
- 6x12x4mm bearings
- 8x16x5mm bearings
What Is Not Included
Only the bearings identified in the included-bearing-size list are part of this kit.
The RC vehicle and separately sold parts are not included unless specifically listed.
Installation & Model Notes
Rubber Shielded Bearing Kit Compatibility:
Quick Fit Summary:
Compatible Brand: Kyosho
Fit: Shared RCScrewZ kit fitment for Kyosho Inferno GT2 Chassis Kit (31830) and Inferno GT2 Race Spec 2020 Mercedes-AMG GT3 (33027).
Compatible RC Model/OEM Numbers: 31830, 33027
Scale: 1/8
Power Source / Fuel Type: Nitro
Battery / Cell Count: Not applicable
Drive Type: 4WD
Vehicle Type: 1/8 Nitro 4WD GT / Touring Car
Chassis: Kyosho Inferno GT2 platform (31830, 33027)
Era: 31830: Modern Transition (2000-2009); 33027: Next Gen Era (2020-Present)
OEM / Models: 31830 — Inferno GT2 Chassis Kit; 33027 — Inferno GT2 Race Spec 2020 Mercedes-AMG GT3
RC Model Terrain: On-Road: Asphalt, Parking Lot & GT Track
This Kit Details:
SKU: kyo114r
MPN: kyo114r
Kit Type: Rubber Shielded Bearing Kit
Bearing Type: Rubber-Shielded Bearings (Off-Road / Sealed)
Sealed Bearings: Yes
Water/Dust Protection: Sealed protection against dirt, dust, and debris
Product Material: Carbon Chrome Steel Bearings
Product Color: Silver
Bearing Size Details:
- 5x8x2.5mm bearings
- 5x10x4mm bearings
- 6x10x3mm bearings
- 6x12x4mm bearings
- 8x16x5mm bearings
OEM / Model Code / Alias Coverage: 31830, 33027
Model Family Coverage: Inferno, Inferno GT, Inferno GT2, GT2 Race Spec
Product Benefits:
- Rubber shielded bearings add sealed protection against dirt, dust, and debris.
- Good choice when contamination protection matters more than the lowest possible drag.
- Seat bearings fully and avoid over-tightening around bearing-supported parts.
Reason to Purchase:
- Choose rubber shielded bearings when you want added contamination protection compared with metal shielded bearings tuned mainly for lower rolling resistance.
Fitment Note: OEM 31830 and OEM 33027 are distinct Kyosho vehicle identities that share this RCScrewZ kit family. Match your exact OEM/model number before ordering.
Search-Friendly Notes: Kyosho Inferno GT2 31830 33027 rubber shielded bearing kit, GT2 chassis kit and Race Spec parts.
Rubber-Sealed Bearing Kit Details
Review the bearing-kit details below before ordering.
- RCScrewZ Kit Part Number
- kyo114r
- Product Brand
- RCScrewZ
- Shielding Type
- Rubber-Sealed (Off-Road)
- Sealed Bearing Status
- Yes
- Bearing Material
- Dust-Resistant Carbon Chrome
- Approximate Piece Count
- Color
- Silver
Before Ordering
- Confirm your exact RC model, RC brand, and OEM/model number whenever possible.
- Review the included-bearing-size list before purchase.
- Read the installation and model notes before disassembly or installation.
Vehicle versions, chassis revisions, and model-year configurations can differ.
Confirm fitment before purchase when your RC vehicle differs from the details shown above.
Share This Kit
Know another RC owner who could use this kit? Send them this exact product page.
More ways to share:
%20%7C%20SET)
Customer Reviews
More Verified Kits for This RC Model
These kits are verified for the same exact RC model and OEM/model number.
Stainless Screw Kit
For Kyosho Inferno GT2 1/8 Nitro 4WD (31830, 33027) OEM/model: 31830, 33027
Metal-Shielded Bearing Kit
For Kyosho Inferno GT2 1/8 Nitro 4WD (31830, 33027) OEM/model: 31830, 33027Continue Shopping by RC Model
Fits: Kyosho Inferno GT2 1/8 Nitro 4WD (31830, 33027)
$53.67