Compatible RC Parts for: Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck

Fits the Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck.

Vehicle image not currently available.

Compatibility is verified using the exact model information shown here.

Verified Model Information

Brand
Traxxas
Exact model
Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck
OEM model
4910
Scale
1:10
Power/fuel type
Nitro & Glow Fuel
Vehicle type
1/10 Nitro 4WD Monster Truck
Chassis/platform
Traxxas T-Maxx 1.5 / .15 4WD monster truck chassis
Terrain
Off-Road: Dirt, Grass, Bashing & Monster Truck Terrain
Production era
Golden Age (1990-1999)

Pick Your Compatible Kit

Choose from the verified kit options available for this exact model:

Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster TruckOEM model: 4910

STAINLESS RCScrewZ Stainless Steel Screw Kit tra009 for Traxxas T-Maxx 1.5 / .15 1/10 Nitro 4WD Monster Truck | SET

Stainless Screw Kit

RCScrewZ Stainless Screw Kit

SKU: tra009

Corrosion-resistant model-specific replacement hardware.

Choose this kit when you want stainless replacement screws for this exact model.

Pieces in kit: 200+ Pieces

Verified fit for:

Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck

OEM model: 4910

$43.95$38.94

Available

View Kit Details
RUBBER RCScrewZ Rubber Shielded Bearing Kit tra009r for Traxxas T-Maxx 1.5 / .15 1/10 Nitro 4WD Monster Truck | SET

Rubber-Sealed Bearing Kit

RCScrewZ Rubber-Sealed Bearing Kit

SKU: tra009r

Sealed protection against dirt, dust, and debris.

Choose this kit for rougher running conditions where sealed bearings are the priority.

Verified fit for:

Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck

OEM model: 4910

$59.95$53.67

Available

View Kit Details
METAL RCScrewZ Metal Shielded Bearing Kit tra009b for Traxxas T-Maxx 1.5 / .15 1/10 Nitro 4WD Monster Truck | SET

Metal-Shielded Bearing Kit

RCScrewZ Metal-Shielded Bearing Kit

SKU: tra009b

Preferred for cleaner conditions and lower-drag priorities.

Choose this kit for cleaner running conditions and lower-drag priorities.

Verified fit for:

Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck

OEM model: 4910

$59.95$53.67

Available

View Kit Details

BEARING KIT GUIDE

Which bearing kit should I choose?

Compare the two verified bearing-kit options for this exact RC model.

Rubber-sealed bearing shown beside a metal-shielded bearing for visual comparison.
Representative illustration. Styles, sizes and quantities vary by kit.

Confirm the OEM/model number shown above before choosing a kit.

All Compatible Products

The listings below show the same verified kit roles with current pricing and links to full product details.

Explore Other Traxxas Models

These links open other exact Traxxas Model Collections. Confirm your vehicle’s model or OEM number before choosing a kit.

MODEL-SPECIFIC FAQ

Frequently Asked Questions

Questions and answers for Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck — Compatible Kits by RCScrewZ (Screws & Bearings).

How do I know these kits fit my Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck?
Each kit on this page is made specifically for the Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck. We cross-check scale, chassis layout and hardware locations against the factory manual so you get the right stainless screws and bearings for this exact RC model—no measuring or guessing.
What's included in the stainless screw kit for Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck?
Every RCScrewZ stainless steel screw kit for Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck includes a model-specific mix of socket head, button head, flat head and set screws, plus matching nuts and washers—with extras of the most commonly used sizes. Each kit also comes with Bondhus short arm hex wrenches in the sizes used on your kit and a durable plastic pit case you can reuse for storage and organizing hardware. Exact counts and sizes vary by model. The kit does not include electronics, shocks, motors or engines, or plastic parts.
Metal or rubber bearings for Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck?
If you run your Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck mainly off-road, rubber-shielded sealed bearings are usually the best choice. The rubber seals help keep out dirt, dust, sand and splash so hubs and drivetrain stay smoother longer. Metal-shielded bearings roll with slightly less drag and work best when you run mostly on clean pavement or prepared on-road tracks.
How does RC Pro Club save me money on Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck kits?
RC Pro Club is our rewards program for RC builders. Every order for your Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck earns points you can redeem for discounts on future screw kits and bearing kits. When you grab multiple kits for the same model—like a stainless screw kit plus metal-shielded or rubber-shielded bearings—you earn more points in a single order and unlock bigger savings over time.
What's included in the RCScrewZ bearing kits for Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck?
RCScrewZ bearing kits for Traxxas T-Maxx 1.5 (Original T-Maxx) Nitro Monster Truck are designed as a complete upgrade package. You get every bearing needed for the chassis plus one extra of each size for quick spares. Kits can include standard, flanged, one-way and thrust bearings where your model uses them, so you are not hunting for odd sizes or partial sets. Each kit comes packed in a reusable storage case that keeps your bearings sorted in the pit box and ready for the next rebuild.

Need a different RC model?

Find Compatible RC Parts for Your Exact Model

Search by RC brand, model name, series/chassis, or OEM/model number. Exact Model Collections appear first so you can verify fit before choosing a Stainless Screw Kit, Rubber-Sealed Bearing Kit, or Metal-Shielded Bearing Kit.

Find My Exact RC Model Browse All RC Brands