Shield type
Rubber-Sealed (Off-Road)
SAVE
$6.28
$6.28
Why Choose This Kit
Key features and intended use for this kit.
Protection focus
Sealed against dirt & splash
Best suited for
Off-road / dirty conditions
Rubber-Shielded Bearings
RCScrewZ Rubber Shielded Bearing Kit tra133r for Traxxas Stampede BL-2S HD 1/10 Electric 2WD Monster Truck (36354-4) | SET
Rubber-shielded bearings for land-based RC use where added protection from dust, dirt, sand, and mud is preferred.
Fits: Traxxas Stampede BL-2S HD 1/10 2WD Monster Truck (36354-4)
OEM / model: 36354-4
US
- Regular price
- $53.67
- Sale price
- $53.67
- Regular price
-
$59.95
In stock
Confirm this kit fits your RCMatch the RC model and OEM/model number shown above to your vehicle.
Confirm This Fits Your RC
Match the RC model and OEM/model number below before ordering.
- RC model
- Traxxas Stampede BL-2S HD 1/10 2WD Monster Truck (36354-4)
- OEM / model number
- 36354-4
- Kit type
- Rubber-Shielded Bearing Kit — Sealed for Off-Road Protection
- Scale
- 1:10
- Power
- Electric
More compatibility details
- RC brand
- Traxxas
- Vehicle class
- Land
- Kit SKU
- tra133r
- Model series
- Stampede, Stampede 2WD, Stampede BL-2S, BL-2S HD
Product information
Everything You Need Before Ordering
Review what is included, installation notes, shipping details, and complete kit information.
Kit Contents & Installation
What’s Included Model-specific bearing set with one spare of each included size.
- All bearing sizes listed below for this model-specific kit
- One spare of each included size
- Bearing styles vary by RC model and may include standard, flanged, one-way, or thrust bearings
Included bearing sizes for this kit:
- 5x11x4mm bearings
Installation & Model NotesInstallation, cleaning, inspection, and model-specific guidance.
Seat bearings fully and squarely. Do not force them into the housing or overtighten the hardware that retains them.
After dusty, muddy, or wet runs, clean the bearing exterior and dry it thoroughly.
Inspect the bearings for roughness, binding, noise, or excessive play before reuse; service or replace them as needed.
Details & Support
Kit Details Rubber-sealed protection for off-road, dusty, dirty, and muddy running conditions.
- Seal Type
- Rubber-Sealed Bearings
- Protection Priority
- Improved protection against dirt and splash; not waterproof
- Best For
- Off-road use, dust, dirt, sand, mud, and lower-maintenance protection
- Performance Tradeoff
- Protection is prioritized over the lowest possible drag
- Not Ideal For
- Clean, dry on-road or prepared-surface use when lower drag is the priority
- Prefer Metal-Shielded?
- Choose Metal-Shielded bearings for cleaner on-road or prepared surfaces when lower drag is the priority.
Shipping & Returns Handling time, current delivery estimate, and return policy.
Free shipping on all U.S. orders (USPS Priority Mail).
Ships within 1–2 business days (Mon–Fri); some Saturday shipments by 12:00 PM ET.
Most orders ship from Canton, MI 48187. APO/FPO/DPO & PO Boxes welcome.
Priority Mail typically delivers in 2–3 business days (estimates; not guaranteed).
Easy 30-day returns with prepaid USPS label; refunds issued within 3 business days after the return is received.
Over 99% positive over ~14,000 orders on eBay (last 12 months) — as of October 2025. View on eBay
Full Product Description Read the complete product specifications and details.
Exact RC Model Fitment
Confirm the exact RC model and RC vehicle OEM/model number below before ordering.
- Compatible RC Model
- Traxxas Stampede BL-2S HD 1/10 2WD Monster Truck (36354-4)
- Compatible RC Brand
- Traxxas
- RC Vehicle OEM / Model Number(s)
- 36354-4
- RCScrewZ Kit Part Number
- tra133r
Vehicle Compatibility Details
Review these vehicle details to help confirm compatibility with your RC model.
- RC Vehicle OEM / Model Number(s)
- 36354-4
- RC Chassis Compatibility
- Traxxas Stampede BL-2S HD 2WD Chassis (36354-4)
- Compatible Vehicle Type
- 1/10 Electric 2WD Monster Truck
- Terrain Compatibility
- Compatible Scale
- 1:10
- Compatible Fuel Type
- Electric
What Is Included
Included bearing sizes for this Rubber-Sealed Bearing Kit:
- 5x11x4mm bearings
What Is Not Included
Only the bearings identified in the included-bearing-size list are part of this kit.
The RC vehicle and separately sold parts are not included unless specifically listed.
Installation & Model Notes
Rubber Shielded Bearing Kit Compatibility:
Quick Fit Summary:
Compatible Brand: Traxxas
Fit: Model-specific fitment for Traxxas Stampede BL-2S HD
Compatible RC Model/OEM Numbers: 36354-4
Scale: 1/10
Power Source / Fuel Type: Electric
Battery / Cell Count: 2S LiPo capable
Drive Type: 2WD
Vehicle Type: Monster Truck
Chassis: Traxxas Stampede BL-2S HD 2WD Chassis (36354-4)
Era: Next Gen Era (2020–Present)
OEM / Models: 36354-4
RC Model Terrain: Off-Road: Dirt, Grass & Backyard Bashing
This Kit Details:
SKU: tra133r
MPN: tra133r
Kit Type: Rubber Shielded Bearing Kit
Bearing Type: Rubber-Shielded Bearings (Off-Road / Sealed)
Sealed Bearings: Yes
Water/Dust Protection: Sealed protection against dirt, dust, and debris
Product Material: Carbon Chrome Steel Bearings
Product Color: Silver
Bearing Size Details:
- 5x11x4mm bearings
OEM / Model Code / Alias Coverage:
- 36354-4
Model Family Coverage:
- Traxxas Stampede BL-2S HD
- BL-2S HD identifies the brushless Stampede 2WD package with Extreme HD-style durability upgrades where source-backed.
Product Benefits:
- Rubber shielded bearings add sealed protection against dirt, dust, and debris for rougher RC use.
Reason to Purchase:
- Choose rubber shielded bearings for off-road, dusty, dirty, clay, parking-lot, or mixed-surface running when contamination protection matters more than the lowest possible rolling drag.
Fitment Note:
- Match your Traxxas OEM/model number before ordering. This listing is for the RCScrewZ kit family only and is not genuine Traxxas OEM hardware.
Search-Friendly Notes:
- Common buyer searches may include Traxxas Traxxas Stampede BL-2S HD screw kit, Traxxas Traxxas Stampede BL-2S HD bearings, and OEM 36354-4 replacement hardware.
Rubber-Sealed Bearing Kit Details
Review the bearing-kit details below before ordering.
- RCScrewZ Kit Part Number
- tra133r
- Product Brand
- RCScrewZ
- Shielding Type
- Rubber-Sealed (Off-Road)
- Sealed Bearing Status
- Yes
- Bearing Material
- Dust-Resistant Carbon Chrome
- Approximate Piece Count
- Color
- Silver
Before Ordering
- Confirm your exact RC model, RC brand, and OEM/model number whenever possible.
- Review the included-bearing-size list before purchase.
- Read the installation and model notes before disassembly or installation.
Vehicle versions, chassis revisions, and model-year configurations can differ.
Confirm fitment before purchase when your RC vehicle differs from the details shown above.
Share This Kit
Know another RC owner who could use this kit? Send them this exact product page.
More ways to share:
%20%7C%20SET)
Customer Reviews
More Verified Kits for This RC Model
These kits are verified for the same exact RC model and OEM/model number.
Stainless Screw Kit
For Traxxas Stampede BL-2S HD 1/10 2WD Monster Truck (36354-4) OEM/model: 36354-4
Metal-Shielded Bearing Kit
For Traxxas Stampede BL-2S HD 1/10 2WD Monster Truck (36354-4) OEM/model: 36354-4Continue Shopping by RC Model
Fits: Traxxas Stampede BL-2S HD 1/10 2WD Monster Truck (36354-4)
$53.67