Find Compatible RC Parts by Model: A Maxx 89086-4 Shopping Walkthrough
A familiar model name is a useful starting point when buying RC parts. The exact version and manufacturer’s model number are what help you narrow the choice.
At J-M SUPPLIES RC Parts Store, start with your RC’s identity, open its Model Collection, and review the screw or bearing kits listed for that model. Before ordering, match the model number again on the product page and check the contents and any limitations. If the identity is uncertain, ask for help before choosing a kit.
This walkthrough follows a Traxxas Maxx/WideMaxx 89086-4 through the current storefront. You can use the same checking process for your own RC without assuming that a kit for a similar vehicle will fit.
Start with the identity of your RC
Find the manufacturer’s model number on the original box, manual or official parts diagram. You may see it described as an OEM/model number. OEM means original equipment manufacturer; here, the number identifies the vehicle version you need to check.
Write down four details:
- Brand: the manufacturer, such as Traxxas.
- Exact model and edition: include version names and generation details.
- Model number: keep the letters, numbers and suffixes together.
- Changes from the original build: note replacement hubs, drivetrain parts, chassis conversions or other aftermarket components.
A body shell, paint scheme or shared scale does not establish compatibility. Two vehicles can look alike while using different hardware or bearings. Also distinguish the vehicle’s model number from the part number of an individual screw, bearing or upgrade.
For more help with these distinctions, use the RC Compatibility Guide.
How the current storefront helps you make those checks
Following the October 25, 2026 storefront release, here is how the current model-first shopping route works. The Compatibility Hub’s displayed index is dated October 31 and lists 2,775 RC models. That gives you more than 2,700 model entries to explore; the kits offered still depend on the exact model.
Search with the information you already have. The Hub accepts a brand, model name or OEM/model number. If you know the full number, use it to narrow the results. If you prefer to browse, the guided navigator lets you choose a brand, then a series or chassis family, then the exact model.
Check the vehicle before the product. A Model Collection brings the model identity and its listed kits together. In the Maxx example below, the page shows the OEM number, scale, power type and chassis information above the kit choices.
Compare the available kit types in one place. The Maxx collection separates stainless screws, rubber-sealed bearings and metal-shielded bearings, with links to each product’s details. Other collections may have a different layout or fewer kit choices.
Keep a route back to the right model. The demonstrated collection and product pages link back to the Compatibility Hub or the exact Model Collection, so you can recheck the identity before continuing.

Watch the model-first shopping walkthrough
See how to check the vehicle identity, open its Model Collection and review the kit before ordering. This video uses the same Maxx 89086-4 example as the written guide.
Video transcript
Before you buy an RC screw or bearing kit, confirm the exact vehicle. A familiar name, matching body or shared scale does not establish that a kit fits.
Find the brand, full version and manufacturer’s model number on the box, manual or official parts diagram. Note any changes from the original build.
In this example, eight nine zero eight six dash four identifies the Traxxas Maxx vehicle. A kit code, also called a SKU, identifies the replacement product. Keep those two identifiers separate.
Open the J-M SUPPLIES RC Parts Store Compatibility Hub and search the complete vehicle number. In the results, select Model Collections. Compare the full model name and number with your documentation. If they differ, return to the Hub.
Open the matching collection and choose the type of kit your repair needs. A screw kit replaces hardware. A bearing kit serves a different job. You do not need every option simply because it is listed.
Before ordering, open the individual product page. Recheck the vehicle number and kit code. Read the contents, sizes and any exclusions or installation notes. A representative photo does not establish exactly which parts are included.
Changed hubs, axles or other assemblies need a separate fitment check. If a detail is missing or uncertain, use our compatibility help before ordering.
Read the full shopping walkthrough from J-M SUPPLIES RC Parts Store at jmsupplies dot store.
Follow a Traxxas Maxx 89086-4 from search to kit
Example checked November 5, 2026 (UTC). Listings, available kit choices and search results can change; recheck the current pages before ordering.
1. Search the complete model number
Open the RC Model Compatibility Hub, enter 89086-4 in its search field and select Search.
On the results page, select Model Collections. If the RC Parts & Kits tab opens first, switch to Model Collections before choosing a product. In this walkthrough, that tab returned one collection labeled Traxxas Maxx WideMaxx 1/10 4WD Monster Truck (89086-4).
Check both the name and number. A result containing only “Maxx” is not enough to confirm that it matches your vehicle.

2. Open the collection and confirm the identity
Open the Traxxas Maxx/WideMaxx 89086-4 Model Collection.
The current page identifies Traxxas, 89086-4, 1:10 scale and electric power, and repeats the model number before the kit choices. Compare those details with your documentation. The page’s model information matters more than a representative product picture.
You can also reach this same collection through the Hub’s guided navigator: choose Traxxas, then Maxx/WideMaxx, then Traxxas Maxx WideMaxx 1/10 4WD Monster Truck (89086-4), and select View RC Model Collection.
If your number is different, return to the Hub. Do not treat this example as confirmation for another Maxx version.
3. Choose the type of work you need to do
The demonstrated collection lists three separate RCScrewZ products sold by J-M SUPPLIES RC Parts Store:
- tra102 — Stainless Screw Kit: for replacement hardware.
- tra102r — Rubber-Sealed Bearing Kit: for the listed bearing applications, with protection from dirt and debris as a selection priority.
- tra102b — Metal-Shielded Bearing Kit: an alternative bearing option for cleaner conditions and lower-drag priorities.
These are product identifiers, or SKUs. They identify the kit listing; 89086-4 identifies the RC model. Keep the two kinds of number separate when checking your order.
A screw kit does not replace bearings, and a bearing kit does not replace screws. Choose the product that serves your repair. You do not need all three simply because the collection lists them.

4. Recheck the product page before ordering
For example, open the tra102r rubber-bearing kit details. The current page repeats the model, 89086-4, SKU tra102r, and the bearing-kit type near the buying area. Its title uses “Rubber Shielded,” while the collection uses “Rubber-Sealed” for this same listing.
Read the product description and fitment information, including any listed sizes, quantities, exclusions or installation notes. A representative photograph cannot establish the exact contents. Check current availability and price on the live page, since both can change.
If an aftermarket component uses a different bearing size or fastener, verify that component separately. Matching the original vehicle model does not confirm every modification.
Which kind of kit should you consider?
| Kit type | Main reason to consider it | What still needs checking |
|---|---|---|
| Stainless Screw Kit | Model-specific replacement hardware with corrosion resistance. | Correct sizes, threads, head styles, applications and exclusions. Stainless is not automatically stronger than every factory fastener. |
| Rubber-Sealed Bearing Kit | Added protection from dirt and debris, often useful for off-road or mixed-terrain use when offered for the model. | Exact fit, bearing design and care needs. “Sealed” does not mean waterproof or maintenance-free. |
| Metal-Shielded Bearing Kit | Often considered for cleaner running conditions and lower-drag priorities when offered for the model. | Exact fit, contamination exposure and the product’s guidance. Shield material alone does not guarantee a speed gain. |
Use the bearing-cover comparison guide for more detail. For hardware selection, read How to Choose the Right RC Screw Kit.
A model-specific kit can simplify sourcing several replacements, but the job may call for only one known fastener or further inspection before buying bearings. Base the purchase on what needs repair, the relevant specifications and the actual kit contents.
Before ordering, make one final comparison
Keep your manual or model record beside the product page. Confirm the exact vehicle number and version, then the product’s SKU and kit type. Review the listed contents and exclusions, and check whether any modified components change the parts you need.
Do not assume every screw kit includes every pin, clip, special fastener, tool or accessory shown in a general image. Likewise, do not infer a complete bearing count from a picture or a list of bearing sizes. If the detail you need is missing or conflicting, resolve it before placing the order.
The RC product FAQs provide additional background. Exact product information and confirmed model details should guide your final selection.
If your model is missing or you are unsure
Start with the information you can verify. Collect the manufacturer’s name, model number, manual or parts-diagram reference, and a description of any modifications. Keep clear photos of labels and the relevant assembly available if support asks for them; a body photo alone may not identify the chassis.
Use RC compatibility and project help to describe the model and the parts you are trying to find. If you cannot identify it, say so. An uncertain match should remain a question until there is enough information to check it.
A missing search result does not establish that a similar model’s kit fits. It also does not, by itself, establish that your model cannot be supported.
Common questions
Where should I look for my RC model number?
Check the original box, manual and manufacturer’s parts diagram. Preserve suffixes and version details. If you have an individual replacement part number, keep it separate from the vehicle’s model number.
Can I use a kit for a similar chassis or a different edition?
Only when the exact application is confirmed. Shared branding, scale, appearance or a chassis-family name is not enough. Compare the specific edition and model number, then ask about any unresolved difference.
What if my model-number search opens RC Parts & Kits first?
Select Model Collections, open the matching vehicle result and confirm its complete name and model number before choosing a kit.
Is 89086-4 the same kind of identifier as tra102r?
No. In this example, 89086-4 identifies the Traxxas vehicle; tra102r identifies the rubber-bearing kit listing. Check both so the vehicle and selected product remain matched.
Why might my Model Collection show fewer than three kit choices?
Available kit types vary by model. Choose only an option listed for your confirmed model; a missing role does not justify substituting a kit from a similar vehicle.
Will a kit cover an RC with aftermarket upgrades?
A listing for the original model does not establish fitment for changed hubs, transmissions or other assemblies. Check the aftermarket component’s documentation and ask about any differences before ordering.
Find your model before choosing your kit

The useful sequence is simple: identify the RC, confirm its Model Collection, then review the kit that matches your repair. J-M SUPPLIES RC Parts Store brings those checks together so you can make an informed choice and ask for help when something does not match.
For a shorter refresher, use How to Quickly Find Compatible RC Parts. Keep the RC Compatibility Guide and RC product FAQs available for deeper questions.

Leave a comment